Big-box craft stores
Shelves built for vinyl and paper. Laser-grade stock is thin, and nobody in-store can tell you a power setting.
CraftwellA catalogue that exists only for laser and engraving, with settings attached to every sheet.
Laser & engraving · end to end
Crafting made easy,all in one place.
The one-stop shop for the laser and engraving craft. Machines, laser-grade materials and the accessories that keep them running — one catalogue, one cart, tested settings on every sheet, shipped worldwide.
Machines from $159Materials from $19Free settings library
Starter bundleIN STOCK
Aurora D2 + material kit
10 W diode frame, honeycomb bed, plywood, acrylic and slate blanks — the whole first-project set.
- Machine
- $249
- Material kit
- $74
- Presets
- Included
- Shipping
- Tracked
Diode engravers/CO₂ cutters/Fiber markers/Rotary attachments/Basswood plywood/Cast acrylic/Slate blanks/Anodised tags/Veg-tan leather/Honeycomb beds/Air assist pumps/Replacement lenses/Diode engravers/CO₂ cutters/Fiber markers/Rotary attachments/Basswood plywood/Cast acrylic/Slate blanks/Anodised tags/Veg-tan leather/Honeycomb beds/Air assist pumps/Replacement lenses/
- Tested material presets
- 1,400+Tested material presets
- Countries on the shipping map
- 38Countries on the shipping map
- Payment methods at checkout
- 12Payment methods at checkout
- Typical order value
- $95Typical order value
The gap we close
Everyone sells craft supplies. Nobody owns the laser bench.
We dropped the vinyl-cutter crowd entirely. Craftwell is built for one vertical — laser cutting and engraving — from the machine on your desk to the sheet you burn through on a Tuesday night.
General marketplaces
Ten sellers, ten thicknesses, no consistency. The plywood that cut cleanly last month is a different batch this month.
CraftwellOne supplier, calibrated batches, so your saved presets keep working order after order.
Single-brand ecosystems
Locked cartridges and proprietary consumables. Your machine decides what you are allowed to buy.
CraftwellOpen by design — every material works with every machine we stock, whoever built it.
1,400+verified presets
Tested settings on every material
Each material page ships with power, speed and pass counts for the machines we sell. Scan the card, load the preset, cut it right the first time.
1 cartmachine + consumables
One cart for machines and refills
Machine, honeycomb bed, plywood and replacement lenses come from the same catalogue in one shipment — not four sellers and four delivery dates.
12payment methods
Pay the way you already pay
Cards, wallets, bank transfer and instalments at checkout, priced in your currency, so a $400 machine never dies at the payment step.
38countries served
Shipping that survives a laser
Rigid crating for machines, flat-packed sheet goods that arrive unwarped, tracked worldwide with duties calculated before you confirm.
2 tapsto restock
Reorder in two taps
Your last twelve material orders live on one screen. Set a repeat interval on the sheets you burn through and stop re-searching the same SKU.
< 4 hfirst reply
Support that owns a laser too
Our support team runs the same machines. Send a photo of a bad edge and get a settings fix, not a link to a generic help centre article.
Machines · $150 – $400
Pick the bench that matches what you make.
Diode, CO₂ and fiber — chosen by output, not by brand. Every frame ships aligned, crated and paired with its own tested material list.
Best first machine
Aurora D2 Diode Engraver
Open-frame 10W diode for wood, leather and coated metal.
- Optical power
- 10 W
- Work area
- 400 × 400 mm
- Spot size
- 0.06 mm
$249Notify me
Cuts, not just marks
Forge 60 CO₂ Cutter
Enclosed 60 W CO₂ bed that cuts acrylic and 6 mm plywood.
- Optical power
- 60 W
- Work area
- 600 × 400 mm
- Extraction
- Inline, 100 mm
$399Notify me
Mark One Fiber Marker
Deep permanent marking on steel, brass and anodised aluminium.
- Source
- 20 W fiber
- Field lens
- 110 × 110 mm
- Marking speed
- 7000 mm/s
$379Notify me
Fits every Craftwell frame
Halo Rotary Attachment
Wrap tumblers, glasses and bottles without re-aligning.
- Diameter
- 8 – 105 mm
- Drive
- Dual roller
- Mounting
- Tool-free
$159Notify me
Materials · $19 – $50
The refills you buy every month, calibrated.
Sheet goods and blanks are where a laser workshop actually spends its money. Ours arrive in consistent batches with the power, speed and pass count printed on the pack, so a preset you saved in March still works in November.
- Tested settings for diode, CO₂ and fiber on every pack
- Batch-consistent thickness, flat-packed to arrive unwarped
- Set a repeat interval and your bench never runs dry
Basswood plywood sheets
Pack of 12 · 300 × 200 × 3 mm
Laser-grade, void-free core. Zero-scorch surface finish.
$28/ pack
Cast acrylic panels
Pack of 6 · 300 × 200 × 3 mm
Cast, not extruded — cuts with a polished flame edge.
$34/ pack
Slate coaster blanks
Pack of 8 · 100 mm round
Calibrated thickness so one setting fits the whole batch.
$22/ pack
Anodised aluminium tags
Pack of 50 · 50 × 25 mm
Marks bright silver on black at a single pass.
$19/ pack
Veg-tan leather panels
Pack of 4 · 300 × 300 mm
Low-smoke tannage, engraves with crisp burnished lines.
$41/ pack
Honeycomb bed & air assist
Kit · 400 × 400 mm + pump
Kills flashback marks and keeps the lens clear for longer.
$46/ pack
How it works
From empty bench to first clean cut.
- 01
Pick your machine
Filter by what you actually want to make — coasters, signage, jewellery, tumblers — and see only the machines that can do it.
- 02
Add the matching materials
Every machine page lists the sheet goods, blanks and accessories that are already tested against it. Add them in one click.
- 03
Burn, reorder, repeat
Load the preset, make your first clean cut, then set your favourite materials to restock automatically.
Early makers
Built with the people at the bench.
Sample quotes from our pilot group
“The preset on the plywood page was right on the first pass. I had eleven finished coasters in the time I used to spend running test grids.”
“I run a small signage side business. Having the acrylic, the honeycomb bed and the spare lens on one invoice is the boring feature I needed most.”
“Instalments meant the enclosed cutter was actually reachable. It arrived crated properly, aligned, and cut acrylic the same evening.”
FAQ
Questions makers ask us first.
Still unsure whether Craftwell fits your setup? Join the waitlist and reply to the welcome email — a maker on our team answers it.
No. Craftwell is built for both ends of the journey — start with a beginner diode frame and a starter material pack, or skip the machine entirely and use us purely as your material supplier.
Yes. Nothing in the catalogue is locked to a brand. Material pages list tested settings for common diode, CO₂ and fiber classes, so you can match them to whatever is on your bench.
Most orders land around $95 — either a machine or attachment in the $150–$400 range, or a restock of sheet goods and accessories in the $20–$50 range. Both ship from the same catalogue.
Cards and major wallets at launch, plus bank transfer and instalment options in supported regions, with local currency pricing and duties shown before you confirm the order.
Machines ship crated on a rigid pallet base with foam-set optics and tracked delivery. Sheet goods ship flat-packed between boards so acrylic and plywood arrive unwarped.
You get early access when the store opens in your region, first pick of launch stock, and a founding-member discount on your first material order. No spam, and one click to leave.
Opening soon
Get first pick of launch stock.
Join the waitlist for early access to the machines, the material presets and a founding-member discount on your first restock.
No card requiredOne-click unsubscribeShips to 38 countries